Automatic motion
The identity takes shape, then the plan. Every piece has a place.
Scroll over the film to change pace · select a chapter to inspectLow’s Custom Stainless · Est. 1991
The Pinnacle Of
Stainless Steel
Custom stainless bar tops, architectural metalwork and restaurant fabrication—designed, formed, welded and finished around your space.
An LCS-authored design-to-build film. Project details follow the reviewed drawings and field conditions.
A new capability. The same craft.
New at LCS:
Laser Welding.
LCS uses an IPG LightWELD 1000 for handheld laser welding. We select the process around the material, joint, access and finish.
Fit the joint.
The edge, the fit-up and the support establish the work before the torch moves.
Follow the seam.
Controlled travel joins the prepared metal. The fused seam follows behind the active weld.
Finish it through.
Cleaning and blending follow the joint’s requirements, bringing the surface into the selected finish.
Inside the joint · process animation
Fit and support the joint
Consult & Plan
Collaborative design and expert planning built around your vision.
Fabricate
Expert craftsmanship. Custom stainless built to last.
Deliver & Prep
Careful loading and on-time delivery, prepped and ready for the field.
Install & Perfect
Precision installation — efficient, clean, and zero disruption.
Precision in the light.
From precise fit
to a continuous finish.
Fit-up, joining, grinding and blending carry the selected finish through the edge and around the corner.
Explore the storeThe detail holds the whole.
Made to be
looked at closely.
Grade defines the material. Finish defines its surface. Every edge, corner and reflection should belong to the same piece.
LCS Specialty Finish
Primarily 2B stainless, orbitally sanded for a nondirectional sparkle. Diffuse, never mirror polished.
The corner, resolved.
A closed joint and a continuous edge. Forming, joining and blending carry the surface through the turn.
A precise joining process.
Laser welding adds another fabrication option. Fit-up, material and finish determine the method.
Details from our design-to-build and laser-process films. Physical samples and reviewed project details control the final selection.
One build discipline · many surfaces
The metal changes
the room.
Start with how the bar must work. Then choose the metal, finish, edge and care profile that belong in the space. Compare the surface here; final construction follows project drawings and a field template.
Stainless steel
A durable front-of-house workhorse. 304, 316L and 430 are grades selected for service conditions; the finish is a separate decision.
- Surface
- 2B low sheen · #4 straight grain · #8 mirror · LCS Specialty Finish
- Behavior
- The LCS Specialty Finish starts primarily from 2B and is orbitally sanded for a sparkling, diffuse appearance. It is never a mirror polish.
- Build
- Field templated, cut, formed, TIG-welded, ground and blended.
The material, in the room.
See surfaces in spaces Low's has built. Finish and edge shape change how a bar reads under working light.
Beyond the finish
Every break
changes the story.
A bar has a surface, a cross-section, and a path through the room. Move through them together. Low's reviews the final grade, sheet gauge, bends, joints and field dimensions for each build.
304 is a common starting point for bar work. Grade and finish are separate selections. Copper, brass and zinc choices need project review.
02 / Front edgeA tight hem is a small folded return. A marine edge is a low raised spill rim; a backsplash is a separate rear detail. Final geometry and cleanability follow the project.
Service-side rear edgePlan turns and cross-section brake bends are separate decisions. Corners can be mitered and welded or formed to a reviewed radius.
MIG. TIG. Laser.
Focused heat for appropriate sheet-metal joints, adding another option for clean, controlled fabrication.
The joining method is chosen for the actual material, joint, access and finish. This view does not specify a weld procedure.
Drawing → fabrication → installation
The whole bar.
Brought together.
A source-based Yard House equipment bank: a 30-inch drainboard, 48-inch cold-plate ice bin, 24-inch liquor steps and 14-inch blender/sink station. One geometry carries through the drawing and the finished metal.
43-inch main bar height. A 1-inch rear offset inside the 24-inch equipment envelope. Forward speed rails and working faces directed into the bartender aisle.
Enter the cinematic experience ↗
Yard House
In-N-Out
Capital Grille
Chipotle
SoFi Stadium
Apple
Kaiser
DisneySee Our Craftsmanship
From In-N-Outto SoFi Stadium.
Restaurants, stadiums, hospitals, Fortune 500 campuses — 2,000+ builds across 35 states. If it has to be perfect, it's ours.
Backed bythe shop.
Custom stainless built in the shop, then finished and installed where the job happens.
Measured in the field.Planned withreal-world accuracy.
We scale kitchens, verify dimensions, and solve fit issues before they become problems.
Commercial installs.Done right.Done on site.
From stainless counters to full kitchen integration, Low's brings restaurant projects across the finish line.
The finish carries through.Across the surface.Around the corner.
From raw weld to finished stainless surface — clean transitions and premium presentation.
TIG-welded precision.Bar tops builtthe right way.
Clean welds, precise fit-up, and field-proven craftsmanship for stainless bar tops and custom restaurant work.
1-Year Workmanship Warranty. If it fails, we fix it — no charge.
“Sheet metal fabrication is fundamentally an exercise in applied mathematics, spatial geometry, and trigonometry. Get it wrong by a millimeter and nothing fits. Get it right and it looks like it grew there.”
Ready to Build With
Low's Custom Stainless?
Tell us about your project. We'll respond within one business day with a clear assessment and path forward.