THE STORE // BUILT TO SPEC

Custom Builds.
Commissioned to Spec.

Our standard product lines, fabricated in-house to commercial grade. Every piece is templated to your room and quoted to your spec — send the dimensions, we'll send the number.

Custom stainless bar top with draft towers by Low's Custom Stainless

Bar TopsSignature

Custom Stainless Bar Top

TIG-welded 304 stainless, templated to your room, finished to disappear.

304 stainless (316 available)16-ga standard, 14-ga heavy service

Quoted to SpecDetails

Brushed copper bar tops on reclaimed wood fabricated by Low's Custom Stainless

Copper & Specialty Metal Bar Top

Copper, brass, and zinc tops for rooms that want warmth with the same build discipline.

Copper, brass, zinc, stainlessStainless or marine plywood

Quoted to SpecDetails

Seamless ground, blended, and polished stainless finish by Low's Custom Stainless

CountertopsSignature

M5 Oracle Sand Countertop

Our signature hand finish — a non-directional surface that hides a decade of scuffs.

304 stainless, 2B mill base16-ga standard

Quoted to SpecDetails

Commercial stainless kitchen line fabricated and installed by Low's Custom Stainless

Commercial Kitchen Countertop

NSF-minded worktop surfaces built for the line — coved corners, integral splash, zero gaps.

304 stainless (316 for corrosive duty)16-ga standard, 14-ga heavy equipment

Quoted to SpecDetails

Stainless wall shelf, backsplash, and counter installed by Low's Custom Stainless

ShelvingShips 1–3 Days

Stainless Wall Shelving

Gusseted 16-gauge shelving that holds what you actually load it with.

430 18-ga (std) / 304 16-ga (heavy duty)12" × 24" through 18" × 60"

Quoted to SpecDetails

Custom stainless piece on fabrication stands in the Low's shop

Equipment Stands & Work Tables

Stands, tables, and overshelves built around your equipment schedule, not a catalog page.

304 stainless14-ga or 16-ga to duty

Quoted to SpecDetails

Crew installing stainless wall panels behind a cook line

AccessoriesShips 1–3 Days

Wall Panels & Backsplash

Full-height stainless wall protection with seams placed where the eye never lands.

304 stainless18-ga or 20-ga wall duty

Quoted to SpecDetails

Formed stainless trim parts with drawings and calipers in the Low's shop

AccessoriesShips 1–3 Days

Corner Guards

16-gauge 304 corner protection, formed in-house — the first thing carts hit and the last thing to show it.

304 stainless, #4 satin16-ga standard

Quoted to SpecDetails

Hands fitting a hemmed stainless panel

AccessoriesShips 1–3 Days

Kick, Mop & Push Plates

18-gauge 304 door armor, cut to your exact door — the cheapest insurance a kitchen door ever gets.

304 stainless, #4 satin18-ga standard

Quoted to SpecDetails

One-off circular stainless feature mid-build in the Low's shop

CustomSignature

Fully Custom Fabrication

If it can be drawn in metal, we can build it. 2,000+ one-off builds and counting.

All stainless alloys + specialty metalsField-verified, real-world accuracy

Quoted to SpecDetails

Low's Custom Stainless install truck on site at a luxury auto dealership

Overnight Emergency Replacement

Failed surface at close, cooking again by open. We've done it more than once.

Same-day assessmentOvernight where scope allows

Quoted to SpecDetails

Formed stainless trim profiles with measuring tools in the Low's shop

AccessoriesShips 1–3 Days

Cove Base & Corners

20-gauge stainless cove base with welded corners — the wall-to-floor detail health inspectors look for first.

304 (std) or 430 stainless20-ga standard

Quoted to SpecDetails

Fitting a stainless backsplash panel behind a cook line

AccessoriesShips 1–3 Days

Cut-to-Size Backsplash

Your dimensions, 304 #4 satin, hemmed edges — measured today, on the wall this week.

304 stainless, #4 satin20-ga (std) or 22-ga

Quoted to SpecDetails

Stainless splash panels installed at a wet area

AccessoriesShips 1–3 Days

Mop Sink Splash Set

Three-sided 20-gauge 304 protection for the wettest corner in the building.

304 stainless20-ga

Quoted to SpecDetails

Commercial ranges under a stainless hood line

AccessoriesShips 1–3 Days

Hood Filter Spacers

The $15 part that closes a hood inspection finding — formed and shipped same week.

430 stainless (304 available)20-ga

Quoted to SpecDetails

Stainless equipment line with sink stations

AccessoriesShips 1–3 Days

Detachable Drainboards

NSF-pattern 18-gauge drainboards that hook on a sink and drain where they should.

304 or 430 stainless18-ga

Quoted to SpecDetails

Stainless corner and splash detail in a commercial kitchen

AccessoriesShips 1–3 Days

Splash Guards

Fryer and hand-sink splash protection, hemmed 18-gauge 304 — the cheapest grease fire and code fix on the menu.

304 stainless18-ga

Quoted to SpecDetails

Formed stainless trim package laid out with drawings in the Low's shop

AccessoriesShips 1–3 Days

Restaurant Fit-Out Trim Package

Corner guards, cove base, kick plates, end caps, and spacers — one order, one box, one job site.

Corner guards, cove base + corners, kick plates, end caps, filter spacers304 #4 satin throughout (430 option)

Quoted to SpecDetails

Fabricated In-House

Templated, built, and finished by our own crew — never brokered out.

1-Year Workmanship Warranty

If it fails, we fix it — no charge.

35 States Served

2,000+ builds delivered and installed nationwide since 1991.

Don't see your build? That's our favorite kind.

2,000+ one-off builds. Send a photo of the room and rough dimensions — we'll take it from there.

Commission Custom Work